Specification
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Integra™
Single Control Kitchen Pullout Faucet
Models: CA87315 series
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Pullout spray with 59" braided hose)
• Flexible supplies with 3/8" compression fittings
• Chrome liquid dispenser included with 87315CSD
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Spout rotation is 145˚
• Operates with less than 5lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• Built-in vacuum breaker
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Engineered polymers, nonferrous and stainless steel materials
STANDARDS
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
For 8"(203mm)
Mounting
Deck Escutcheon
10-1/4" x 2-3/8"
(260mm) x (60mm)
2"(51mm)
Max.
Deck Thickness
2-3/8" (56mm)Dia.
Round Escutcheon
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
9-7/8"
(250mm)
2-5/8"
(66mm)
2"
(51mm)
3-5/16"
(83mm)
3 Hole, 4" o.c. Installation
Single Hole Installation
8"
(203mm)
Open
Position
8"
(203mm)
8"
(203mm)
2-1/2"
(63mm)
6"
(152mm)
Nominal
Distance
28-1/2”
(724mm)
28-1/2”
(724mm)
Rev. 2/12