Specification Sheet

ManualsBrandsMoen ManualsKitchen FaucetsMoen Adler Kitchen Faucet with Side Spray

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supply lines with 3/8" compression fittings

• With Protégé side spray

• Hydrolock® quick connect installation

OPERATION

• Lever style handle

• Operates with less than 5 lbs. of force

FLOW

• Tap water: 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to CSA B-125.1, ASME A112.18.1, ICC A117.1

and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

•

ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

Adler™

Single Handle Lever Kitchen Faucet

with Protégé Side Spray

Models: CA87016 series

5.291”

(134mm)

9.420”

(239mm)

9.96”

(253mm)

6-5/16”

(160mm)

3-1/2”

(89mm)

Rev. 4/11

Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.

NOTE: DESIGNED TO INSTALL THROUGH

4 HOLES 1-1/4" (32mm) MIN. DIA. AND

4" (102mm) ON CENTER

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
Specifications There is more than 1 version of this model. Page down to identify the version you have. FAUCET DESCRIPTION • • • • Metal construction with various finishes identified by suffix Flexible supply lines with 3/8" compression fittings With Protégé side spray Hydrolock® quick connect installation OPERATION • • Lever style handle Operates with less than 5 lbs. of force FLOW • Tap water: 2.2 gpm max (8.
PAGE 2
Specifications FAUCET DESCRIPTION • • • • Metal construction with various finishes identified by suffix Inlet shank will accept 3/8" ball nose connections With Protégé side spray Hydrolock® quick connect installation OPERATION • • Lever style handle Operates with less than 5 lbs. of force FLOW • Tap water: 2.2 gpm max (8.3 L/min) CARTRIDGE • • 4000 ceramicdisc cartridge design Nonmetallic/nonferrous and stainless steel material Adler™ STANDARDS • • • • • Third party certified to CSA B-125.