Specification

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Single Handle High Arc
Pulldown Kitchen Faucet
Model: CA87012 series
NOTE: THIS FAUCET IS DESIGNED TO
BE INSTALLED THRU 1 HOLE, 1-1/2"
(38mm) MIN. DIA.
2-1/2" (63mm)
max deck thickness
16"
(406mm)
(389mm)
8-11/16"
(221mm)
7-7/8"
(200mm)
3-1/2”
(89mm)
6-7/16”
2”
(50mm)
9-7/8”
(250mm)
(164mm)
3"
(76mm)
2-3/8"
(60mm)
22”
(558mm)
3”
(77mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings connect directly to supply stop
• 360˚ rotating spout provides ability to install handle on either side
OPERATION
• Single handle lever
• Operates with less than 5 lbs. of force
• Convenient single button actuation provides flexibility to switch from eco-stream or
eco-spray mode to fast fill mode
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
• Operates in eco-performance mode by default in aerated and spray stream
CARTRIDGE
• Ceramic disc cartridge
• Non-metallic, non-ferrous and ceramic materials
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installation
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 9/10