Installation Guide

Towel Ring is die cast from highest
quality zinc alloy (zamac). Castings
are triple plated with a polished
chrome or a powder coated white
finish.
 5886CH (BP5886CH) – Towel
Ring
Polished Chrome Finish,
Concealed Screw Mounting.
 5886W – Towel Ring
White Finish,
Concealed Screw Mounting.
“BP” skus in w holesale packaging
Cleaning Instructions:
25300 AL MOEN DRIV E  NORT H OLM ST ED, OH 44070 (800) 321 -8809 
FAX : [phone]  INT ERNAT IONAL: (4 4 0 ) 962 -2000 
FAX : [phone] CUST OM ER SERV ICE (US A): 800 -882-0116
WWW.M OEN.COM
©Copyri g h t Cre a ti ve Speci al ti e s In tern a ti onal L i tera ture #BA 0 9 6 9
1. Position the mounting plate on the wall at desired location with “UP”
facing you.
2. One at a time, place each anchor screw through the mounting plate,
centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
3. Place assembly over the mounting post, setscrew facing down.
4. Tighten setscrew.
Stock Number:_____________________ Towel Ring
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
5886
Aspen Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.