Technical Specifications

 BH2918BN – 18 in. Towel Bar

Brushed Nickel Finish

25300 AL MO E N D R IVE  NO RTH O L M STE D, OH 44070

CO R P O RATE HE A D Q U ART ER S : (800 ) 3 2 1 -88 0 9  FA X: (800) 8 48 - 6 6 36

IN T E RNAT IO NA L : (440 ) 962 - 2 0 00  FA X: ( 4 4 0 ) 962 -2726

CU ST O MER S ERV ICE (USA): 800 -882 - 0 1 16  FA X: (88 8 ) 379 -2720

WWW .MO EN .COM

Towel Bar is constructed of zinc.

Cleaning Instructions:

Stock Number: BH2918 18 in. Towel Bar

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18 in. Towel Bar

BH2918

Danika

™

Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1) Position the mounting template on the wall in the desired location.

2) Using a level, align the template and tape it to the wall.

3) Drill ¼” holes at each mounting post location that corresponds to your

product. (We recommend using the horizontal holes for drywall

installation).

4) Remove the template from the wall.

5) Lightly tap anchors until flush with the wall.

6) Remove mounting posts from the product assemblies by loosening each

setscrew.

7) One at a time, place each mounting post over anchors (notch facing

downward) and insert screws through post into anchors.

8) Tighten screws.

PAGE 1
Danika™ Technical Specification 18 in. Towel Bar Stock Numbers:  BH2918 Dimensions: BH2918BN – 18 in. Towel Bar Brushed Nickel Finish Installation Instructions: Materials: Towel Bar is constructed of zinc. 1) Position the mounting template on the wall in the desired location. 2) Using a level, align the template and tape it to the wall. 3) Drill ¼” holes at each mounting post location that corresponds to your product. (We recommend using the horizontal holes for drywall installation).