Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FLEXIBLE
CONNECTORS
LIFT ROD
COLD
INLET
1-1/4" (32mm) MAX.
DECK THICKNESS
6" (152mm) MIN.
16" (406mm) MAX.
HOT
INLET
7/8"
(22mm)
MAX.
3/8" DIA.
SUPPLY
TUBE
M•PACT VALVE
Widespread Bidet Rough-in Valve
Model: 9200
DESCRIPTION
• Brass construction
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
• Diverter valve includes an integral vacuum breaker
• Includes pop-up waste assembly
OPERATION
• Handles have 180˚ rotation
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Water flow is diverted by turning the knob counterclockwise
for fill and clockwise for rosetta spray
CARTRIDGE
• 94831 diverter cartridge
• 1224 cartridge design with hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
When Trim Kit is added to M•Pact valve, the product is:
• Third party certified by CSA to meet CSA B-125, ASME
A112.18.1M and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 11/11
NOTE: Minimum Diameter Holes for Installation
Diverter Valve - 1-1/8” (25mm)
Handle Valves - 1-1/8” (29mm)
Spray Nozzle - 5/8” (16mm)
Lift Rod Escutcheon - 1/2” (13mm)
NOTE: Maximum Hole Diameter 1.5"
NOTE: The 9200 valve can not be used with
Non Rim Flush Bidet Fixtures