Dimensions Guide

Specifications
FAUCET DESCRIPTION
• Reex™ pulldown system oers smooth operation, easy movement and secure docking
• Metal construction with various nishes identied by sux
• Duralock™ quick connect
• Power Boost™ Technology provides boosted water performance with the
push of a button
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression ttings
• High arc spout provides height and reach to ll or clean large pots while pull out wand
provides the maneuverability for cleaning or rinsing
• 360˚ rotating spout
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• When lling a vessel outside the sink, the pause feature conveniently stops the ow of
water as the wand passes over the counter top
FLOW
• Standard ow is limited to 1.5 gpm (5.7 L/min) at 60 psi
• Power Boost™ Button activates Boosted Stream and Boosted Spray
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backow protection system in the device consists of two independently operating
check valves, a primary and a secondary which prevent backow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Notch™
Single Handle High Arc
Pulldown Kitchen Faucet
Models: 9124 series
NOTE
: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1 HOLE, 1-1/2" (38MM) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
2-1/2" Max
Deck Thickness
2-1/4"
(57mm)
29-1/2"
(750mm)
8-5/8"
(219mm)
16-1/4"
(413mm)
8"
(203mm)
7-13/16"
(198mm)
6-5/8"
(168mm)
Rev. 1/18
CRITICAL DIMENSIONS
(DO NOT SCALE)