Specification Sheet

Robe Hook

is die cast from highest

quality zinc alloy (zamac) or injection

molded from plastic. Castings are

triple plated with a polished chrome

finish.

R902

–

Single Robe Hook

Polished Chrome Finish

Plastic Body

Exposed Screw Mounting

q 902 – Single Robe Hook

Polished Chrome Finish

Metal Body

Exposed Screw Mounting

Cleaning Instructions:

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •

FAX: (800) 848-6636 • INTERNATIONAL: (440) 962-2000 •

FAX: (440) 962

2726 CUSTOMER SERVICE (USA): 800

882

0116

1. Place unit on wall in desired location.

2. Mark location of holes. Drill starter holes.

3. Attach unit to wall with 1 ½” screws (provided).

Note: Wood blocking is preferable behind all wall surfaces.

If wood blocking is not available, the following optional fasteners are

suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –

Toggle Bolts.

Stock Number:

______________________Robe Hook

By CSI Bath Furnishings

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

902

Economy Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.



PAGE 1
Economy Technical Specification Robe Hook Stock Numbers: q R902 – Single Robe Hook Polished Chrome Finish Plastic Body Exposed Screw Mounting q 902 – Single Robe Hook Polished Chrome Finish Metal Body Exposed Screw Mounting Materials: Robe Hook is die cast from highest quality zinc alloy (zamac) or injection molded from plastic. Castings are triple plated with a polished chrome finish. 902 Dimensions: Installation Instructions: 1. Place unit on wall in desired location. 2. Mark location of holes.