Technical Specifications

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NO
T SCALE)
Specifications
COMMERCIAL
CRITICAL DIMENSIONS
(DO NO
T SCALE)
CRITICAL DIMENSIONS
(DO NO
T SCALE)
Single-Handle ADA Metering
Lavatory Faucet
Model: 8884 (
Chrome)
NOTE: DESIGNED TO BE INSTALLED THROUGH
1 HOLE 7/8" MIN. DIA.
MOEN
4-3/4"
(121mm)
1-9/16"
(40mm)
2-3/8" max
(60mm)
3-3/4"
(95mm)
6-1/4"
(159mm)
2-1/8"
(54mm)
Rev. 7/02
ADA
FAUCET DESCRIPTION
• Chrome plated brass construction
• Metering faucet designed to deliver either
tempered or ambient water.
• Vandal resistant
• Optional 4" deck plate available, purchased
separately see model number 99457
OPERATION
• Metering mechanism is adjustable, to allow the
installer to compensate for supply line pressures
of 20 to 80 psi
•
Cycle time easily adjusted from 10 to 60 seconds
• Factory preset to automatically
shut off after 10 seconds at 80 psi
• 1/2" IPS supply shanks
FLOW
• Vandal resistant aerator limits water discharge
to a maximum of .25 gpc (.95 L/cycle)
CARTRIDGE
• 16352 cartridge design
• Nonmetallic and nonferrous material
• Self contained metering mechanism which
is separate from the potable water supply
STANDARDS
• Third party certified by IAPMO and CSA to meet
ASME A112.18.1M, and all applicable
specifications referenced therein and complies
with the applicable requirements of ANSI A117.1
WARRANTY
• Warranted for 5 years against material
or manufacturing defects