Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Springvale™
Single-Handle Spring
Pulldown Kitchen Faucet
Model: 87998 series
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THROUGH 1, 2, 3 AND 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
8-9/64"
207mm
2-7/16"
62mm
17-23/64"
441mm
3-37/64"
91mm
6-53/64"
173mm
8-19/64”"
211mm
10-1/4" x 2-3/8"
261mm
2-1/2"
64mm
Max. deck
thickness
7/16"
11mm
2-31/32"
75mm
1-31/32"
50mm
DESCRIPTION
High arc spout provides height and reach to ll or clean large pots while the
pulldown wand provides the maneuverability for cleaning or rinsing
Reex® system oers smooth operation, easy movement, self retraction, and
secure docking
Power Clean™ spray technology
Metal construction with various nishes identied by sux
Duralock™ quick connect installation
Pulldown spray with 68” braided hose
Flexible supply lines with 3/8” compression ttings connect directly to supply stop
OPERATION
Lever style handle
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pulldown or retracted position
FLOW
Standard ow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certied to IAPMO Green, ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
ADA for lever handle
The backow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backow
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
3/18

Summary of content (1 pages)