Specification Sheet
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Single Handle High Arc
Pulldown Kitchen Faucet
Model: 87910
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2" (38mm) MIN. DIA.
2-1/2" (63mm)
max deck thickness
15-3/4"
(402mm)
8-11/16"
(221mm)
7-7/8"
(200mm)
3-1/2”
(89mm)
6-7/16”
2”
(50mm)
2-5/8”
(66mm)
9-7/8”
(250mm)
(164mm)
2-3/8"
(60mm)
22”
(558mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Hydrolock® quick connect installation
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings connect directly
to supply stop
• 360˚ rotating spout
OPERATION
• Single handle lever
• Operates with less than 5 lbs. of force
• Convenient single button actuation provides flexibility to switch from
eco-stream or eco-spray mode to fast fill mode
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
• Operates in eco-performance mode by default in aerated and spray stream
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 5/13
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.