Specification Sheet

Specifications
DESCRIPTION
• Reex® system oers smooth operation, easy movement, self retraction,
and secure docking
• Metal construction with spot resist stainless nish
• Duralock™ quick connect system
• Pulldown spray with 68" braided hose
• 3/8" compression connections will accept standard ball nose connection
for 3/8" tubing
• High arc spout provides height and reach to ll or clean large pots while the
pulldown wand provides the maneuverability for cleaning or rinsing
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
• The backow protection system in this device consists of two
independently operating check valves, a primary and a secondary which
prevent backow
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CONNEAUT™
Single Handle High Arc Pull Down
Kitchen Faucet
Models: 87801SRS
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THROUGH 1 OR 3 HOLES,
1-1/2" (38mm) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7-7/8"
(200mm)
8-15/64"
(209mm)
2-1/2"
(64mm)
15-15/32"
(393mm)
Max Deck
Thickness
2-1/2"
(64mm)
4-3/16"
(106mm)
10-1/4"
(260mm)
6-3/8"
(162mm)
27"
(686mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 11/19