Specification

Essie™
Single Handle High Arc Kitchen Faucet
with Protégé® Side Spray
Models: 87735 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 OR 4
HOLES: 1-1/2" (38MM) MIN. DIA. HOLES FOR VALVE AND DECK
PLATE (IF INSTALLED) AND A 1-1/4" (32MM) MIN. DIA. HOLE FOR
SIDE SPRAY
4 HOLES ON 4" CENTERS WHEN INSTALLED WITH DECK PLATE
2 HOLES ON 8” CENTERS WHEN INSTALLED WITHOUT PLATE
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• High arc spout provides the height and reach to fill or clean large pots
• 2 or 4 hole-mount
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout
• Includes hose and Protégé® side spray
• Duralock™ Quick Connect Installation
OPERATION
• Single handle lever
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm max (5.7 L/min)
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein
• Certified to ANSI/NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
7/15
8-13/64"
(208mm)
9-17/64"
(235mm)
13-3/16"
(335mm)
31"
(787mm)
MAX. DECK THICKNESS
2-1/2" (64mm)
4-29/32"
(124mm)
1-15/16"
(49mm)
2-21/32"
(67mm)
3-5/32"
(80mm)
4-27/32"
(124mm)
8"
(203mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com