Specification

FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Inlet shanks will accept 3/8" ball nose connections
• Protege side spray
• Quick-connect installation
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
FLOW
• Tap water: 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 4000 ceramic disc cartridge design
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
9”
(152mm)
7-1/4”
(184mm)
4-1/2”
(114mm)
10-3/4”
(273mm)
MAX. DECK THICKNESS
1-1/8” (29mm)
4-3/4”
(121mm)
Rev. 12/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
Single Handle Lever Kitchen Faucet
with Side Spray
Models: 87690 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 3 HOLES 1-1/4" (32mm) MIN. DIA. AND
4" (102mm) ON CENTER.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com