Manualshelf

Full Product Manual

ManualsBrandsMOEN ManualsKitchenHaelyn Single-Handle Pull-Down Sprayer Kitchen Faucet with Reflex and Power Clean in Spot Resist Stainless
1
Rev. 21-11-2021
Single-Handle High Arc Pulldown Kitchen Faucet
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1, 2, 3 OR 4 HOLES, 1-1/2” (38mm)
MIN.
DIA. (1 HOLE FOR SOAP DISPENSER)
DESCRIPTION
• PowerBoost™
• Metal construction with various finishes identified by suffix
• Reflex™
• Duralock™ quick connect installation
• Pulldown spray with 68” braided hose
• 3/8” compression connections will accept standard
ball nose connection for 3/8” tubing
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
• Visit www.moen.com/support for complete details and limitations
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
DO NOT SCALE
Specifications
2-1/2” (63mm) max.
deck thickness
4-7/8”
124mm
8-3/4”
10-1/4” x 2-3/8”
260mm x 60mm
technology provides boosted water performance with a push of a button
pulldown system offers smooth operation, easy movement and secure docking
Haelyn
TM
: 87627 SERIES
3-1/2”
(123mm)
(89mm)
4-13/16”
2-5/8”
(66mm)
2”
(51mm)
(123mm)
4-13/16”
3-1/2”
(89mm)
6-1/8”
(155mm)
8-11/16”
(220mm)
(222mm)
2-3/4”
(70mm)
6-1/2”
(156mm)
15-15/16”
(404mm)
MODELS

Summary of content (1 pages)