Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
MARIETTA™
Single Handle Pullout Kitchen Faucet
Models: 87601 series
NOTE: DESIGNED TO INSTALL
THROUGH 1, 2, 3 OR 4 HOLES 1-1/2" (38mm) DIA.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Power Clean™ spray technology
• Pullout spray with 59" braided hose
• Flexible supplies with 3/8" compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout rotation is 120˚
• Operates with less than 5lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
39-1/2"
2-1/2"
(64mm)
(1003mm)
8-1/2"
(216mm)
2-1/2" (64mm)
MAX. DECK THICKNESS
6-3/4"
(170mm)
9-1/4"
(235mm)
8-1/4"
(210mm)
2-1/5"
(56mm)
10-2/5"
(264mm)
10-1/5"
(259mm)
9-7/8"
(251mm)
3-1/2"
(89mm)
1-9/10" (48mm)
11°
8/18