Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Single Handle High Arc Pull Down
Kitchen Faucet
Models: 87599 series
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 1, 2, 3 AND 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
6-3/4”
(171mm)
17”
(432mm)
2-7/8”
(73mm)
8-5/8”
(219mm)
Rev. 9/12
DESCRIPTION
Metal construction with various finishes identified by suffix
Quick connect installation
Pulldown spray with 68” braided hose
3/8" compression connections will accept standard ball nose
connection
for 3/8” tubing
High arc spout provides height and reach to fill or clean large pots
while the pulldown wand provides the maneuverability for cleaning
or rinsing
OPERATION
Lever style handle
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pulldown or retracted
position
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and
all applicable requirements therein including NSF 61/9
Meets CalGreen and Georgia SB370 requirements
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations

Summary of content (1 pages)