Dimensions Guide

ManualsBrandsMoen ManualsKitchen Faucets87599SRS

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Kiran

Single Handle High Arc Pull Down

Kitchen Faucet

Models: 87599 series

NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED

THRU 1, 2, 3 AND 4 HOLE, 1-1/2" (38mm) MIN. DIA.

(1 HOLE FOR SOAP DISPENSER)

6-3/4"

(171mm)

10-1/4"

(260mm)

17"

(432mm)

2-7/8"

(73mm)

7-13/16"

(198mm)

1/2"

(13mm)

Max Deck Thickness

9-5/16"

(236mm)

2-5/8"

(67mm)

9-3/4"

(248mm)

1-3/8"

(35mm)

Rev. 6/15

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Duralock™ quick connect installation

• Pulldown spray with 68" braided hose

• 3/8" compression connections will accept standard ball nose connection for

3/8" tubing

• High arc spout provides height and reach to fill or clean large pots while the

pulldown wand provides the maneuverability for cleaning or rinsing

OPERATION

• Lever style handle

• Operates with less than 5 lbs. of force

• Operates in stream or spray mode in the pulldown or retracted position

FLOW

• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

• Engineered polymers, non-ferrous and stainless steel materials

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1

and all applicable requirements referenced therein including NSF 61 & 372

• Meets CalGreen and Georgia SB370 requirements

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

• The backflow protection system in this device consists of two independently

operating check valves, a primary and a secondary which prevent backflow

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • • • Metal construction with various finishes identified by suffix Quick connect installation Pulldown spray with 68” braided hose 3/8" compression connections will accept standard ball nose connection for 3/8” tubing High arc spout provides height and reach to fill or clean large pots while the pulldown wand provides the maneuverability for cleaning or rinsing OPERATION • • • Lever style handle Operates with less than 5 lbs.