Dimensions Guide

2-5/8 "
(66mm)
9-7/8 "
(250mm)
2"
(50mm)
Wave
Sensor
2-1/2"
(64mm)
Max Deck Thickness
7-15/16"
(202mm)
7"
(178mm)
3-5/8"
(92mm)
15-15/16"
(405mm)
8-3/4"
(222mm)
2-5/16"
(58mm)
1/2"
(13mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
Ready
Sensor
AC Adapter with
Power Splitter
(sold separately)
169031
Ridgedale™ w/MotionSense™
Single Handle High Arc
Pulldown Kitchen Faucet
Models: 87340E SERIES
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA.
Close up view of Control Box
S p e c i fi c at i o n s
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Versatile, hands-free convenience in the kitchen
• Allows users to control the faucet in 3 unique ways: Wave Sensor, Ready Sensor and familiar handle
• Powered by 6 AA batteries or optional AC adapter with power splitter
• Reflex™ pulldown system offers smooth operation, easy movement and secure docking
• Metal construction with various finishes identified by suffix
• Pulldown spray with 68" braided hose
• Control B flexible supply lines with 3/8" compression fittings
• High arc spout provides height and reach to fill or clean large
pots while pull down wand provides the maneuverability for cleaning or rinsing
• Includes liquid soap dispenser
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
• Spout rotates 100 degrees
• When filling a vessel outside the sink, the pause feature conveniently stops the flow of water as the
wand passes over the counter top
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced
therein including NSF 61/9 & 372
• Meets Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backflow protection system in the device consists of two independently operating check valves,
a primary and a secondary which prevent backflow
•
ADA for lever handle
WARRANTY
• Limited lifetime warranty against leaks, drips, finish defects to the original consumer purchaser
• 5 year warranty electronic operation defects to the original consumer purchaser
• 5 year warranty against leaks, drips, finish defects if used in commercial installations
• 1 year warranty against electronic operation defects if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/16
1-21/32"
(42 mm)
4-1/8"
(105 mm)
6-5/32"
(156 mm)
29-3/8"
(746 mm)
Battery Holder
5"
(127mm)
2-5/8"
(67mm)
Battery Holder Cable
36" (914mm)
7/8"
(20mm)