Specification

Single Handle High Arc Kitchen Faucet
Models: 87313 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 OR 4
HOLES: 1-1/2" (38MM) MIN. DIA. HOLES FOR VALVE AND DECK
PLATE (IF INSTALLED) AND A 1-1/4" (32MM) MIN. DIA. HOLE FOR
SIDE SPRAY
4 HOLES ON 4" CENTERS WHEN INSTALLED WITH DECK PLATE
2 HOLES ON 8” CENTERS WHEN INSTALLED WITHOUT PLATE
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• High arc spout provides the height and reach to fill or clean large pots
• 2 or 4 hole-mount
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout
OPERATION
• Single handle lever
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61/9
• Meets Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 5/12
8-1/4”
(210mm)
10”
(254mm)
14-3/4”
(375mm)
MAX. DECK THICKNESS
2-1/2” (64mm)
4-3/4”
(121mm)
2”
(51mm)
4”
(102mm)
4”
(102mm)
4”
(102mm)
8”
(204mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com