Specification Sheet

ManualsBrandsMoen ManualsKitchen FaucetsMoen Bayhill High Arc Kitchen Faucet with Side Spray and Metal Lever Handle

Single Handle Single Hole Mount

High Arc Kitchen Faucet

Models: 87301 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU

2 HOLES: A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A

1-1/4" (32MM) MIN. DIA. HOLE FOR SIDE SPRAY.

HOLES ON 4" OR 8" CENTERS.

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• High arc spout provides the height and reach to fill or clean large pots

• Single hole mounting

• Flexible supply lines with 3/8" compression fittings

• 360˚ rotating spout

OPERATION

• Single handle lever

• Temperature controlled by 100˚ arc of handle travel

FLOW

• Flow is limited to 2.0 gpm (7.6 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable

requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 5/13

(203mm)

5-7/8"

(149mm)

-1/2"

(368mm)

29-1/2"

(749mm)

2-1/2"

(64mm)

Max. Deck

Thickness

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com