Specification Sheet

Specifications
DESCRIPTION
• Reex™ pulldown system oers smooth operation, easy movement and secure docking
• Metal construction with Spot Resist™ nish
• Duralock™ quick connect installation
• Power Clean™ Technology for more force, less splash
• Pulldown spray with 68" braided hose
• 3/8" compression connections will accept standard ball nose connection for 3/8" tubing
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA for lever handle
• The backow protection system in this device consists of two independently operating
check valves, a primary and a secondary which prevent backow
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Adler™
Single-Handle High Arc
Pull Down Kitchen Faucet
Model: 87233 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1 OR 3
HOLES, 1-1/2" (38mm) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 8/19
3-1/2"
(89mm)
6-3/16"
(157mm)
8-5/16"
(211mm)
7-1/2"
(190mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
2-1/2" (63.5mm) Max
Deck Thickness
14-9/16"
(370mm)