Technical Specifications

ManualsBrandsMOEN ManualsKitchen ApplianceM-Bition 1-Handle Wall Mount Kitchen Faucet with 12 in. Spout in Chrome

MOEN SPECIFIER SER

VICES 1-800-321-8809 Ex

. 2158

w.moen.com

CRITIC

AL DIMENSIONS

(DO NO

T SC

ALE)

Specifications

COMMERCIAL

CRITIC

AL DIMENSIONS

(DO NO

T SC

ALE)

CRITIC

AL DIMENSIONS

(DO NO

T SC

ALE)

FAUCET DESCRIPTION

• Chrome plated brass construction

• Supplied with 12" spout

• 1/2" IPS connections

• Supplied with vandal resistant screws

OPERATION

• Lever style handle with hot and cold color indicators

• Temperature controlled by 180˚ arc of handle travel

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1225 cartridge design

• Nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified by CSA to meet CSA B-125 and

ASME A112.18.1M and all applicable specifications

referenced therein and complies with the requirements

of ANSI A117.1, NSF 61/9, and Califor

nia Proposition 65.

WARRANTY

• Warranted for 5 years against material

or manufacturing defects

Single-Handle Wall Mount Kitchen Faucet

Model: 8714

8" (203mm) CENTERS

ADJUST FROM 7-1/2" (191mm)

TO 8-1/2" (216mm)

2-1/16"

(52mm)

1/2" (13mm)

VERTICAL

ADJUSTMENT

4-3/4" (115mm)

CLOSED POSITION

(229mm)

(203mm)

6-5/8"

(168mm)

5-1/2"

(140mm)

(178mm)

1/4" (6mm)

OFFSET

FINISHED

WALL

3-1/2" (89mm) MIN.

3-3/4"(95mm) MAX.

ESCUTCHEON NUT

ESCUTCHEON

SEAL

1/4" (6mm) OFFSET

ECCENTRIC

1/2" I.P.S.

FINISHED WALL

5/16" (8mm) MIN.

9/16" (14mm) MAX.

ADA

Rev. 8/03

Summary of content (1 pages)

PAGE 1
Specif ications COMMERCIAL FAUCET DESCRIPTION • Chrome plated brass construction • Supplied with 12" spout • 1/2" IPS connections • Supplied with vandal resistant screws OPERATION • Lever style handle with hot and cold color indicators • Temperature controlled by 180˚ arc of handle travel FLOW • Aerator is limited to 2.2 gpm max (8.3 L/min) CARTRIDGE • 1225 cartridge design • Nonmetallic/nonferrous and stainless steel material STANDARDS • Third party certified by CSA to meet CSA B-125 and ASME A112.18.