Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Single Handle High Arc Pull Down
Kitchen Faucet
Models: 87066 series
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 1, 2, 3 AND 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
9-61/64"
253mm
7-11/16"
195mm
16-39/64"
422mm
10-23/64"
263mm
7-5/8"
194mm
3-57/64"
99mm
2-25/64"
61mm
2-15/16"
74mm
12/13
DESCRIPTION
• Reflex® system offers smooth operation, easy movement,
self retraction, and secure docking.
• Metal construction with various finishes identified by suffix
• Quick connect installation
• Pulldown spray with 68” braided hose
• 3/8" compression connections will accept standard ball nose
connection for 3/8” tubing
• High arc spout provides height and reach to fill or clean large pots
while the pulldown wand provides the maneuverability for cleaning
or rinsing
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted
position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations