Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Walden™
Single Handle Pullout
Kitchen Faucet
Models: 87045M series
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 1, 2, 3 AND 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
12-5/64"
307mm
7-23/64"
187mm
10-17/64"
261mm
9-49/64"
248mm
Max Deck Thickness
2-1/2"
Rev. 10/13
DESCRIPTION
• Reflex® pull down system offers smooth operation, easy movement,
self retraction, and secure docking.
• Metal construction with various finishes identified by suffix
• Quick connect installation
• Pullout spray with 68” braided hose
• 3/8" compression connections will accept standard ball nose connection
for 3/8” tubing
• High arc spout provides height and reach to fill or clean large pots while
the pullout wand provides the maneuverability for cleaning
or rinsing
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary which
prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations