Dimensions Guide

Specifications
DESCRIPTION
• Metal construction with spot resist stainless finish
• Duralock™ quick connect installation
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression ttings
• High arc spout provides height and reach to ll or clean large pots while the pull out
wand provides the maneuverability for cleaning (or rinsing)
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certied to IAPMO Green ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•
ADA for lever handle
• The backow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backow
WARRANTY
• Limited lifetime warranty against leaks, drips and nish defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
Kendall™
Single Handle High Arc
Pull Down Kitchen Faucet
Model: 87032SRS
NOTE: THIS FAUCET IS DESIGNED TO
BE IN STALLED THRU 1 OR 3 HOLE,
1-1/2" (38mm) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
10-1/4"
(260mm)
4"
(101mm)
11-13/16"
(299mm)
MAX. DECK THICKNESS
2-1/2"
(64mm)
8-1/8"
(205mm)
2-11/16"
(67mm)
7-7/8"
(199mm)
8-11/16"
(220mm)
15-5/16"
(391mm)
2"
(50mm)
8-7/8"
(222mm)
3"
(76mm)
7/15