Specification

Belmont™
4" Lavatory Faucet
with Metal Waste Assembly
Models: 84902 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
4"
(102mm)
4 -5/8"
(117mm)
3-5/16"
(84mm)
4 -1/4"
(108mm)
3 -5/8"
(92mm)
4 -5/8"
(117mm)
2-5/8"
(67mm)
3/8" min.
(10mm)
1-1/2" max.
(38mm)
4"
(102mm)
4 -5/8"
(117mm)
3-5/16"
(84mm)
4 -1/4"
(108mm)
3 -5/8"
(92mm)
4 -5/8"
(117mm)
2-5/8"
(67mm)
3/8" min.
(10mm)
1-1/2" max.
(38mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 11/11