Dimensions Guide

Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• 1/2" IPS connections
• Includes non-metal push-down waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
FLOW
• Water usage is limited to these maximum ow rates as indicated by
the corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certied to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certied to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
eciency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Lindor™
Two-Handle Widespread
Lavatory Faucet
Models: 84504 series
NOTE: This faucet is designed to be installed
through 3 – 1 1/8" dia. holes, 4" on center.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 11/18
8"
(203 mm)
Centers
3-5/8"
(92 mm)
4-11/16"
(118 mm)
4-7/8"
(124 mm)
6"
(152 mm)
2-13/16"
(71 mm)
2-1/2"
(57 mm)
2"
(52 mm)
1-1/4" (32 mm)
Max Deck Thickness
6"
(152 mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
M•pact System
There is more than one version of this model.
Page down to identify the version you have.