Specification

Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products
made before October 2008 ow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certied to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certied to ANSI/NSF 61/9 & 372
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA
for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and nish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Hensley™
4" Lavatory Faucet
with Metal Waste Assembly
Models: 84411 series
NOTE: THIS FAUCET IS DESIGNED TO BE IN
STALLED THRU 3 HOLES, 1" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
3-15/16"
(10 cm)
4-5/32"
(10.5 cm)
2-1/2"
(63.5 mm)
4"
(10.2 cm)
2-17/32"
(65 mm)
7-5/32"
(18.2 cm)
X-X/X"
(XXmm)
MAX
5-29/32"
(15 cm)
Rev. 1/15