Technical Specifications

ManualsBrandsMoen ManualsPlumbing Product8418

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

COMMERCIAL

FAUCET DESCRIPTION

• Solid brass construction

• Chrome finish

• 3/8" compression x 15" stainless steel supply lines

OPERATION

• 6” lever handle w/red and blue temperature indicators

• Temperature controlled by 110˚ arc of handle travel

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 121549 ceramic disc cartridge

• Nonmetallic/nonferrous and ceramic material

STANDARDS

• Third party certified to CSA B125, ASME

A112.18.1M, ANSI A117.1, and all applicable

requirements referenced therein

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with

the Federal Safe Drinking Water Act

WARRANTY

• Warranted for 5 years against materials or

manufacturing defects

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THROUGH 1 HOLE 1-3/8" MIN. DIA.

Single Handle Lavatory Faucet

Less Drain

Model: 8418

2-1/2"

(64mm)

9-1/2"

(242mm)

7-1/4"

(185mm)

(51mm)

7-1/4"

(185mm)

2-3/8"

(60mm)

4-3/8"

(112mm)

1-1/2" MAX.

(38mm)

HOT

COLD

55˚

ADA

Rev. 2/07

Summary of content (1 pages)

PAGE 1
Specifications COMMERCIAL FAUCET DESCRIPTION • Solid brass construction • Chrome finish • 3/8" compression x 15" stainless steel supply lines OPERATION • 6” lever handle w/red and blue temperature indicators • Temperature controlled by 110˚ arc of handle travel FLOW • Aerator is limited to 2.2 gpm max (8.3 L/min) CARTRIDGE • 121549 ceramic disc cartridge • Nonmetallic/nonferrous and ceramic material STANDARDS • Third party certified to CSA B125, ASME A112.18.1M, ANSI A117.