Specification

Rev. 05-05-2022
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2’’ IPS connections for flexible hoses only; not for use with rigid or
semi-rigid supply risers (3/8’’ Copper or Pex) with coupling nuts
• Installation through 3 holes, 1’’min.diameter, and 4’’ on center
• Includes non-metal push-down waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90° to full on
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
• Rotating spout
FLOW
• Water usage is limited to these maximum flow rates as
indicated by the corresponding product markings
• 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1224 cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA
B125.1, and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with
California water efficiency regulations
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
• Visit www.moen.com/support for complete details and limitations
Ronan
™
Two-Handle 4” Centerset Lavatory Faucet
NOTE:
Thin and thick deck mounting hardware kits available
MODELS:
84022 Series
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
5/16” (8mm) min.
deck thickness
1-3/16” (30mm) max.
deck thickness
5-5/8”
142mm
4”
102mm
2-1/2”
65mm
6-3/8”
163mm
2-3/4”
69mm
4”
102mm
8-1/8”
208mm
6-5/8”
167mm
9-3/8”
239mm