Specification

MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
Single-Handle Pressure Balancing
Tub/Shower Valve
with Temperature Limit Stop
Model: 8350
7" (178mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
LEVER
HANDLE
5-1/2" (140mm)
WALL OPENING
ESCUTCHEON
FLOOR
2-1/16" (52mm) MAX.
1-7/16" (59mm) MIN.
1-3/4" (44mm)
L
32" (813MM)
NOMINAL
(TUB)
3-9/16" (90mm)
MIN. WALL
CAVITY
C
7"(178mm)
ESC. DIA.
C
H
PULL ON
1/2" COPPER
SUPPLY – TYP.
7" (178mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
LEVER
HANDLE
5-1/2" (140mm)
WALL OPENING
ESCUTCHEON
FLOOR
2-1/16" (52mm) MAX.
1-7/16" (59mm) MIN.
1-3/4" (44mm)
L
32" (813MM)
NOMINAL
(TUB)
3-9/16" (90mm)
MIN. WALL
CAVITY
C
7"(178mm)
ESC. DIA.
C
H
PULL ON
1/2" COPPER
SUPPLY – TYP.
Rev. 11/11
FAUCET DESCRIPTION
• Chrome plated brass and metal construction
• Pressure balancing valve design with integral check stops
• 1/2" CC connections
• Supplied with vandal resistant screws
OPERATION
• Lever style handle with temperature indicator on the escutcheon
• Pull-on/push-off operation
• Temperature operates through an 180° arc of handle travel
(full cold to full hot)
• Adjustable temperature limit stop to limit the handle travel in
the HOT direction
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including ASSE 1016
•
ADA for lever handle
WARRANTY
• Warranted for 5 years against material or manufacturing defects
COMMERCIAL
C O M M E R C I A L