Technical Specifications

Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• Includes showerhead, arm, ange and diverter spout
• Pressure balancing cycle valve design with an adjustable temperature limit stop
• 1/2" IPS/CC connections
OPERATION
• Lever style handle with temperature indicator on the escutcheon
• Handle operates counterclockwise through a 270° arc with o at 6 o’clock and maximum
hot at the 9 o’clock position. Shut o in clockwise direction
• Adjustable temperature limit stop to control maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge temperature to ± 3°
FLOW
• Showerhead is limited to 1.75 gpm (6.6L/min) at 45 psi
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certied to meet ASME A112.18.1/CSA B125.1 and all applicable requirements
referenced therein
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Arlys™
POSI-TEMP®
Single-Handle Tub/Shower
Model: 82770 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 2/19
FINISHED WALL LINE
FACE OF STUD
DIRECTION
OF HANDLE
ROTATION
6-31/32"
(177mm)
ESC. DIAM.
4-1/2"
(114mm)
3-1/2"
(89mm)
8-3/8"
(212mm)
2"CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
C
L
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1-3/8" (35mm)
1-3/8"
(35mm)
3/16"(typ) (5mm)
L
C
1-1/2" MAX.
(38mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
WALL OPENING
OPENING
PLASTIC
TUB/SHOWER
SURROUND
FLOOR LINE
SHOWER
45" (1143mm)/
48" (1219mm)
32" (813mm)
TUB/SHOWER
AND TUB ONLY
NOMINAL
2-7/16" C.C.
(61mm)
2-1/2"
(64mm)
4-1/2"
(114mm)
FLOOR LINE
2-7/8"
(72mm)
HOT
INLE
T
COLD
INLET
6'-6"
(1981mm)
7-1/2"
(191mm)
MIN
6-3/8"
(162 mm)