Technical Specifications

ManualsBrandsMoen ManualsShower ComponentsMoen 1/2 Inch IPS Posi-Temp Pressure Balanced Rough-In Valve (No Stops)

S p e c i f i c a t i o n s

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 6/11

POSI-TEMP® VALVE

Pressure-Balancing Valve

Model: 82510

TUB

SHOWER

FLOOR

1/2" CC

SUPPLY

2-3/4" (70mm) C.C.

4-1/2" (114mm) PLASTER

GROUND SIZE AND

WALL OPENING

2" CC (51mm)

1 7/8" IPS (48mm)

MAX WALL

FINISHED WALL LINE

FACE OF STUD

32" (813mm) - TUB OR

TUB SHOWER

45" (1143mm)/

48" (1219mm) - SHOWER

2-1/2" MAX.

(63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

1-3/8"

(35mm)

FLOOR LINE

1-3/8"

(35mm)

1-1/2"

(38mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

PLASTIC

TUB/SHOWER

SURROUND

DIAMETER

WALL

OPENING

DESCRIPTION

• Brass construction

• 1/2" IPS connections

• Pressure balancing, four port, cycle valve

OPERATION

• Adjustable temperature limit stop to control maximum hot

water temperature

• Pressure balancing mechanism maintain selected discharge

temperature to ± 3°F

CARTRIDGE

• 1222 cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certified to meet ASME A112.18.1/ CSA B-125.1,

ASSE 1016, and all applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks, drips and finish

defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Summary of content (1 pages)

PAGE 1
S p e c i f i c a t i o n s DESCRIPTION • Brass construction • 1/2" IPS connections • Pressure balancing, four port, cycle valve OPERATION • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintain selected discharge temperature to ± 3°F CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to meet ASME A112.18.1/ CSA B-125.