Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Flush button with raised stream and spray in di ca tors
• Pullout spray with 59" fiber hose
• Flexible supplies with 3/8” compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout receptor rotation is 120˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary which
prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
2-1/2"(64mm) 2-1/8"(54mm)
1-1/4"(32mm) Dia.
M i nimum
M o unting Hole
8"
(203mm)
10-1/2"
(265mm)
Deck Escut cheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
10-1/2"
(266mm)
10-3/4"
(273mm)
2-3/8" (60mm)
Escut cheon Dia.
M ax. Deck T h ick ness
Single M ount Esc .
M ax. Deck T hick ness
D e c k E s c .
28-1/2"
(724mm)
Rev. 2/11
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
Extensa®
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7560 series
There is more than 1 version of this model.
Page down to identify the version you have.