Specification Sheet

Specifications
FAUCET DESCRIPTION
• Metal construction with various nishes identied by sux
• Quick connect installation
• Pullout spray with 59" braided hose
• Flexible supplies with 3/8" compression ttings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout receptor rotation is 120˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1, NSF 61/9 and all
applicable requirements referenced therein
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA for lever handle
• The backow protection system in this device consists of two independently operating check
valves, a primary and a secondary which prevent backow
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Camerist®
Single-Handle Kitchen
Pull Out Faucet
Models: 7545 series
67545 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1 OR
3 HOLE, 1-1/2" (38MM) DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 6/17
12"
305mm
7-3/8"
187mm
10-1/4"
261mm
13-1/8"
333mm
9-3/4"
248mm
9/16"
14mm
Max Deck
Thickness
2-1/2"
64mm
2-3/8"
60mm
10-1/4"
260mm