Specification Sheet

ManualsBrandsMoen ManualsPlumbing Product7437

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

There is more than 1 version of this model.

Page down to identify the version you have.

S p e c i f i c a t i o n s

DESCRIPTION

• Metal construction with chrome plated finish

• Flexible supplies with 3/8" compression fittings

• Includes Protégé side spray

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

• Will operate with less than 5 lbs. of force

FLOW

• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

• Diverted flow at side spray limited to 2.0 gpm max (7.6 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to: IAPMO Green, CSA B125.1, ASME A112.18.1,

and all applicable re quire ments referenced therein including NSF61/9

• Meets CalGreen and Georgia SB370 requirements

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

4-3/4"

(121mm)

(51mm)

5-9/16" (141mm)

NOMINAL

8-5/8"

(219mm)

IN OPEN POSITION

9-1/8"

(232mm)

6-3/4"

(171mm)

(51mm)

Max. Deck

Thickness

7/8"

(22mm)

Max. Deck

Thickness for

Side Spray

32"

(813mm)

CHATEAU®

Single-Handle Kitchen Faucet

Model: 7423 less spray

7437 with spray

NOTE: DESIGNED TO INSTALL

THRU 2 HOLES 1-1/4" (32mm) MIN. DIA.

AND 4" (102mm) ON CENTER

Rev. 9/11

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • Metal construction with chrome plated finish Flexible supplies with 3/8" compression fittings Includes Protégé side spray OPERATION • • • Lever style handle Temperature controlled by 100˚ arc of handle travel Will operate with less than 5 lbs. of force FLOW • • Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi Diverted flow at side spray limited to 2.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • Metal construction with chrome plated finish 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing Includes Protégé side spray OPERATION • • • Lever style handle Temperature controlled by 180˚ arc of handle travel Will operate with less than 5 lbs. of force FLOW • Aerator is limited to 2.2 gpm max (8.