Specification

7/8" (22mm)
MAX. DECK
THICKNESS
FOR SIDE
SPRAY
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4" x 2-1/4" WIDE
(261mm x 58mm)
4-3/4"
(121mm)
2"
(51mm)
8-1/2"
(216mm)
IN OPEN POSITION
9-1/8"
(232mm)
6-11/16"
(170mm)
32"
(813mm)
Specifications
FAUCET DESCRIPTION
• Metal construction with various nishes identied by sux
• Flexible supplies with 3/8" compression ttings
• Includes side spray with Duralock™ quick connect system
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Spout ow is limited to 1.5 gpm (5.7 L/min) at 60 psi max
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including ANSI/NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CHATEAU®
Single-Handle Kitchen Faucet
Models: 7430 series with spray
7425 series less spray
Bulk Model: 67430 series with spray
67425 series less spray
(bulk packed 12 per carton)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/17
NOTE: 7430 SERIES DESIGNED TO INSTALL
THROUGH 4 HOLES 1-1/4" (32mm) MIN.
DIA. AND 4" (102mm) ON CENTER.
7425 SERIES DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4"
(102mm) ON CENTER.
There is more than 1 version of this model.
Page down to identify the version you have.