Technical Specifications
1 ¼” Grab Bar
rods are formed from
18-
gauge (.049) type 304 stainless steel
tubing with a satin finish.
q
7412
–
12” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q R7418 – 18” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q R7424 – 24” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q R7432 – 32” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q R7436 – 36” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q R7442 – 42” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
q 7448 – 48” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •
FAX: (800) 848-6636 • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 96
2
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors;
Plaster/Drywall – Toggle Bolts.
Stock Number:
____________________1 ¼” Grab Bars
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ¼” Grab Bars – Exposed Screw
7400
Home Care Technical Specification
Copyright CSI Bath Furnishing Division of Moen 02/22/01
A B C
7412 12" 8.5 15.25
7418 18" 14.5 21.25
7424 24" 20.5 27.25
7432 32" 28.5 35.25
7436 36" 32.5 39.25
7442 42" 38.5 45.25
7448 48" 44.5 51.25