Installation Guide

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
WWW.MOEN . C OM
Copyright Creative Specialties International Literature #BA1678
1 ¼” Grab Bar rods are formed from
type 304 stainless steel tubing with a
satin finish.
12” – 42” length is 20 gauge
48” length is 18 gauge
 7412 – 12” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
 R7418 – 18” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
 R7424 – 24” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
 R7436 – 36” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
 R7442 – 42” Grab Bar
Satin Finish
1 ¼” Bar
Exposed Screw Mounting
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors;
Plaster/Drywall – Toggle Bolts.
Stock Number:____________________1 ¼” Grab Bars
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ¼” Grab Bars – Exposed Screw
7400
Home Care Technical Specification
- ADA Compliant
- Tested to 300 lbs. pull
Compliance:
A
B
C
7412
12"
8.5
15.25
R7418
18"
14.5
21.25
R7424
24"
20.5
27.25
R7436
36"
32.5
39.25
R7442
42"
38.5
45.25