Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
LEVEL™
Single Handle High Arc
Pull Out Kitchen Faucet
Models: 7175 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2” (38mm) MIN. DIA.
5-3/4”
(146mm)
15-15/32”
(392mm)
4-7/16”
(112mm)
8-3/16”
(208mm)
2-1/2” Max
Deck Thickness
7-7/8”
(199mm)
2-5/16”
(58mm)
29-1/2”
(750mm)
Rev. 5/13
FAUCET DESCRIPTION
• Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides height and reach to fill or clean large
pots while pull out wand provides the maneuverability for cleaning or rinsing
• 360˚ rotating spout
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• When filling a vessel outside the sink, the pause feature conveniently stops the flow
of water as the wand passes over the counter top
FLOW
• Flow is limited to 2.2. gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1, NSF 61/9 and all applicable
requirements referenced therein
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations