Dimensions Guide
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7/8" (22mm)
MAX. DECK
THICKNESS
FOR SIDE
SPRAY
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4" x 2-1/4" WIDE
(261mm x 58mm)
4-3/4"
(121mm)
2"
(51mm)
8-1/2"
(216mm)
IN OPEN POSITION
9-1/8"
(232mm)
6-11/16"
(170mm)
32"
(813mm)
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
• Includes Protégé side spray with Hydrolock® quick connect system
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to CSA B125.1, ASME A112.18.1, and all applicable
re quire ments referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Kitchen Faucet
Models: 7430 series with spray
7425 series less spray
Bulk Model: 67430 series with spray
67425 series less spray
(bulk packed 12 per carton)
NOTE: DESIGNED TO INSTALL THROUGH
4 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 2/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
There is more than 1 version of this model.
Page down to identify the version you have.
Spec i fi ca tions


