Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 6/19
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
OPERATION
• Lever style handle with red & blue indicators
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
• 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for single-handle faucets
STANDARDS
• Third party certified to: WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
8-7/16"
(214mm)
7-3/8"
(187mm)
2-1/4"
(57mm)
4-9/16"
(116mm)
29-5/8"
(753mm)
4-1/16"
(103mm)
33.5°
5-3/16"
(132mm)
5-7/8"
(149mm)
1-9/16"
(40mm)
2-1/2"
(63mm)
Recommended
Wall Clearance
NOTE: This faucet is designed to be
in stalled through 1 hole or 3 holes that are
1" diameter and 2" on center
GENTA™
One-Handle Lavatory Faucet
Model: 6702
(includes deck plate)
There is more than one version of this model.
Page down to identify the version you have.