Specification Sheet

There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up type waste assembly
OPERATION
• Lever style handles with hot and cold color indicators
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two-Handle Lavatory Faucet
Models: 4925 series
With 50/50 Waste Assembly
Bulk Pack (12 per Carton)
Model: 64925 series
NOTE: DESIGNED TO BE INSTALLED THROUGH
3 - 1” MIN. DIA. HOLES 2” ON CENTER
2-9/32"
(58mm)
2"
(50mm)
2"
(50mm)
3-11/32"
(84mm)
6-11/64"
(156mm)
1-13/64"
(30mm)
3-3/16"
(80mm)
4-21/64"
(110mm)
ESCUTCHEON DIA.
6-1/4" x 2-19/32"
(159mm x 66 mm)
MAX. DECK THICKNESS
3/4" (19mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15