Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE: 50/50 or metal waste assembly models are
designed to be installed through 3 - 1” dia. holes
2” on center. Models less waste assembly are designed
to install through 2 - 1” min. dia. holes 4” on center
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up type waste assembly
OPERATION
• Knob style handles
• Rotate either handle counterclockwise to open and clockwise
to close
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
2-9/32"
(57mm)
2"
(50mm)
2"
(50mm)
HOT
1/2" NPT INLET
COLD
1/2" NPT INLET
ESCUTCHEON DIA.
6-1/4" x 2-19/32"
(159mm x 66 mm)
3/4" (19mm)
MAX. DECK
THICKNESS
3-11/32"
(85mm)
6-9/64"
(156mm)
1-13/64"
(30mm)
3-3/16"
(80mm)
4-11/32"
(110mm)
CHATEAU®
Two-Handle 4” Lavatory Faucet
With Metal Waste Assembly
Model: 4920 series
With Metal Waste Assembly
Bulk Pack Model (12 per Carton):
64919 series
With 50/50 Waste Assembly
Bulk Pack Model (12 per Carton):
64920 series
Less Waste Assembly
Model: 4900
Bulk Pack (12 per Carton):
64900
Rev. 8/15
There is more than 1 version of this model.
Page down to identify the version you have.