Dimensions Guide

DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal/50/50 pop-up type waste assembly where noted
OPERATION
• Acrylic knob style handle
• Tilt-on/ tilt-off
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
°
1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
NOTE:THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Models: 4621 series
Bulk Pack (12 Per Carton): 64620 series
with 50/50 Waste Assembly
Bulk Pack (12 Per Carton): 64621 series
Less Waste
Model: 4601 series
Bulk Pack (12 Per Carton): 64601 series
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(50mm)
1/2" IPS
ADAPTER
2"
(50mm)
3-5/8"
(92mm)
5-3/4" (146mm)
OFF POSITION
1-3/4"
(45mm)
DECK PLATE
TOP OF
MOUNTING
SURFACE
6" (152mm)
(ESCUTCHEON WIDTH
2"
(25mm)ESC.
WIDTH
LIFT
ROD
4"
(101mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15
There is more than 1 version of this model.
Page down to identify the version you have.