Specification Sheet

TUB
SHOWER
FLOOR
COLD EXPANSION PEX
2-5/16" (59mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-1/2" MAX.
(63mm)
1/2" (13mm) MIN. CC & 5/8" (16mm) IPS
1-1/16"
(27mm)
FLOOR LINE
1-1/16"
(27mm)
L
C
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
POSI-TEMP® VALVE
Pressure-Balancing Valve with
cold expansion Pex Connection
Models:
62365 (cold expansion Pex without stops),
62385 (cold expansion Pex with stops)
DESCRIPTION
• Brass construction
• Cold expansion Pex connections
• Pressure balancing, four port, cycle valve
OPERATION
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintain selected discharge
temperature to ± 3°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1 and
ASSE 1016, all applicable requirements referenced therein
• Moen’s Posi-Temp® and Moentrol® valves with graphite composite
spools combined with Moen’s Eco-performance showerheads meet
the performance requirements of pressure and temperature
variation of ASSE1016 when tested as low as 1.5 gpm
• ASTM F-1960 - Standard specification for cold expansion fittings
with PEX reinforcing rings for use with Pex tubing
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7/11