Specification Sheet

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 12/05
FP62380
FP62380
FP62380
FP62380
TUB
SHOWER
FLOOR
1/2" CC
SUPPLY
2-5/16" (59mm) C.C.
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2"
CC
(51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-7/8" MAX.
(73mm)
7/8" MIN. CC & IPS (22mm)
1"
(25mm)
FLOOR LINE
1"
(25mm)
L
C
2-1/8"
(54mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
POSI-TEMP
®
VALVE
Pressure-Balancing Valve
Model: FP62380 (PEX)* - Bulk Packed
(Bulk packed 12 per carton)
DESCRIPTION
• Brass construction
• PEX connections*
• Pressure balancing, four port, cycle valve
• Includes pre-installed test plug (cartridge also
included inside carton)
• Allows valve to be soldered, pressure-tested, and
flushed without damaging the cartridge
OPERATION
• Adjustable temperature limit stop to control maximum hot
water temperature
• Pressure balancing mechanism maintain selected discharge
temperature to ± 3°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet CSA B-125, ASME A112.18.1M
ASSE 1016, and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
* The PEX Posi-Temp valves are NOT to be used
with polybutylene (PB) tubing or the Wirsbo
"expandable" joining system