Specification Sheet

FOR MORE INFORMATION: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 8/09
7-1/8"
(181mm)
SHOWER
Quick-Connect
FLOOR
FLOOR
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
1-7/8" (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
45" (1143mm)/
2 -1/2" MAX.
(63mm)
5/8" MIN. (16mm)
1-1/16"
(27mm)
1-1/16"
(27mm)
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
M•PACT POSI-TEMP® VALVE
Pressure-Balancing Valve with
1/4 Turn Stops
Model: 62330 -Bulk Pack
(Bulk packed 12 per carton)
DESCRIPTION
• Brass construction
• 1/2" CPVC connections w/Hydrolock® connections and 1/4 turn stops
• Pressure balancing, four port, cycle valve
OPERATION
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintain selected
discharge temperature to ± 3°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet CSA B-125.1, ASSE 1016,
CSA B-137.6, ASTM D2846, ASME A112.18.1 and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
There is more than 1 version of this model.
Page down to identify the version you have.