Specification Sheet

DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 Cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1 and
all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
KINGSLEY™
Two Handle Lavatory Faucet
Models: 6121 series
NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED
THRU 3 HOLES, 1” (25mm) MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 8/15
4-1/2"
(114mm)
6-3/4"
(171mm)
3-1/4"
(82mm)
4-3/8"
(111mm)
ESCTUCHION DIA.
6-7/16" x 2-17/32"
(164mm) x (64mm)
3/4" (19mm)
MAX. DECK
THICKNESS
4"
(102mm)
2-7/16"
(62mm)
MOUNTING
NUT/WASHER
HOT
1/2" NPT
COLD
1/2" NPT
LIFT ROD
There is more than 1 version of this model.
Page down to identify the version you have.